- Postcode district
- CW5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Crewe, Sandbach, Winsford
- Building rules
- England
Tilt and slide patio doors in Nantwich: what to know
A few practical points decide whether tilt and slide doors suit a particular room and opening:
For a flat in Nantwich, check your lease or title deeds and speak to the managing agent, factor or other owners before replacing a balcony door, since flats can need consent that houses do not.
Where an old patio door in Nantwich rattles or lets in draughts, a sash that seals on all four edges is a practical fix that keeps the same opening.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
- Tilting the sash lets steam and cooking smells out of a kitchen-diner in seconds, without the security worry of a door left wide open.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
Light and sun in Nantwich
Daylight in Nantwich runs from about 7 h 33 min in December to 16 h 57 min in June, with the noon sun at roughly 13° and 60° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Tilt and slide patio doors prices in Nantwich
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 2.4 m | 2 panels | £2,595–£3,195 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
How fitting works in Nantwich
Here is the usual sequence in Nantwich: guide price, free survey, written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Crewe, Sandbach and Winsford.
Do you need approval in Nantwich?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Options to consider for your tilt and slide door
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
Questions about tilt and slide doors in Nantwich
Is the price different in Nantwich?
No. Guide prices for tilt and slide doors are the same across mainland Britain, including Nantwich. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.
What is a tilt and slide door?
A tilt and slide door is a patio door whose opening sash can either tilt inward at the top for ventilation, or move forward and slide parallel across the fixed panel. The handle selects the mode. When closed, the sash is pulled back into the frame and sealed on all four sides, so it behaves more like a large window than a conventional slider.