- Postcode district
- LL29
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Conwy, Llandudno, Abergele
- Building rules
- Wales
Tilt and slide patio doors in Colwyn Bay: what to know
These are the points a surveyor will go through with you when you choose tilt and slide doors for a home in Colwyn Bay:
For a flat in Colwyn Bay, check your lease or title deeds and speak to the managing agent, factor or other owners before replacing a balcony door, since flats can need consent that houses do not.
If a bedroom in your Colwyn Bay home opens onto a balcony or garden, the tilt position on tilt and slide doors lets in fresh air at night without leaving the door open.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
- The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
Light and sun in Colwyn Bay
Daylight in Colwyn Bay runs from about 7 h 30 min in December to 17 h 00 min in June, with the noon sun at roughly 13° and 60° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
What should you budget for tilt and slide doors in Colwyn Bay?
Pricing is transparent and does not change because you are in Colwyn Bay. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
What happens when you order tilt and slide doors in Colwyn Bay?
Here is the usual sequence in Colwyn Bay: guide price, free survey, written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Conwy, Llandudno and Abergele.
Do you need approval in Colwyn Bay?
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Choosing the specification
- Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
- Glass. Toughened or laminated double glazing, or triple glazing for extra warmth and sound reduction.
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
Questions about tilt and slide doors in Colwyn Bay
How soon can you survey in Colwyn Bay?
Surveys in the LL29 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off.
What is a tilt and slide door?
A tilt and slide door is a patio door whose opening sash can either tilt inward at the top for ventilation, or move forward and slide parallel across the fixed panel. The handle selects the mode. When closed, the sash is pulled back into the frame and sealed on all four sides, so it behaves more like a large window than a conventional slider.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.
Is a tilt and slide door safe to leave tilted?
A tilt and slide door in the tilt position opens only a narrow gap at the top, so it is far harder to get through than an open door, but it is not locked. Close and lock the sash whenever the house is empty. When closed, perimeter locking points hold the sash like a window, and systems are available tested to PAS 24.