Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Tilt and slide doors
Tilt and slide patio doors · BT39

Tilt and slide patio doors in Ballyclare

Our tilt and slide doors are made to measure for each opening and fitted in Ballyclare and nearby Antrim. The written quote fixes the price for the surveyed specification.

Postcode district
BT39
Survey
Free, area covered by arrangement
Typical lead time
Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
Guide price
From £1,995 inc VAT
Nearby
Antrim, Newtownabbey, Carrickfergus
Building rules
Northern Ireland

Tilt and slide patio doors in Ballyclare: what to know

A few practical points decide whether tilt and slide doors suit a particular room and opening:

Where an old patio door in Ballyclare rattles or lets in draughts, a sash that seals on all four edges is a practical fix that keeps the same opening.

A kitchen in Ballyclare that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.

  • Made in both uPVC and aluminium, in white, foiled or powder-coated colours, a tilt and slide door can match the windows around it.
  • The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
  • A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.

Daylight in Ballyclare and what it means for your glass

June 59°Dec 12°

At the latitude of Ballyclare, the midday sun climbs to about 59° in late June but only about 12° in late December, when daylight lasts around 7 h 13 min against 17 h 19 min in midsummer. A south-facing tilt and slide door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.

Guide prices for tilt and slide doors in Ballyclare

These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.

Guide prices for tilt and slide doors in Ballyclare
Overall widthTypical panelsGuide price (fitted, inc VAT)
1.8 m2 panels£2,195–£2,695
2.1 m2 panels£2,395–£2,895
3.0 m2 panels£2,995–£3,595

See every size on the tilt and slide doors page or try the guide price tool.

What happens when you order tilt and slide doors in Ballyclare?

A surveyor visits your Ballyclare home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off — and fitting usually takes 1 day for a straight swap in an existing opening. We also cover Antrim (14 km south-west) and Newtownabbey (14 km south-east). Ballyclare is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.

Do you need approval in Ballyclare?

In Northern Ireland, the Building Regulations (Northern Ireland) apply through your district council's building control service, with energy guidance in Technical Booklet F1. Work in Northern Ireland is by arrangement, and we confirm the approval route for your property at survey.

Which options matter for tilt and slide doors?

  • Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
  • Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
  • Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.

Questions about tilt and slide doors in Ballyclare

Is the price different in Ballyclare?

The door price is the same as anywhere else. Because Ballyclare is covered by arrangement, any travel cost for delivery and fitting is shown in your quote before you order; the survey itself is free.

How long does a tilt and slide door take?

A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.

Is a tilt and slide door safe to leave tilted?

A tilt and slide door in the tilt position opens only a narrow gap at the top, so it is far harder to get through than an open door, but it is not locked. Close and lock the sash whenever the house is empty. When closed, perimeter locking points hold the sash like a window, and systems are available tested to PAS 24.

How much does a tilt and slide patio door cost?

Tilt and slide patio doors start from a guide price of £1,995 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.1 m door is a guide £2,395–£2,895, and a 3 m door is around £2,995. Aluminium frames, colour and triple glazing move the figure up, and the final price is fixed in a written quote after survey.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote