- Postcode district
- EX10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Honiton, Exmouth, Exeter
- Building rules
- England
Is a tilt and slide door a good fit for your home in Sidmouth?
Before you settle on a door type, it helps to know what tilt and slide doors do well and what to check before you order.
For a flat in Sidmouth, check your lease or title deeds and speak to the managing agent, factor or other owners before replacing a balcony door, since flats can need consent that houses do not.
Is the opening in your Sidmouth home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
- Made in both uPVC and aluminium, in white, foiled or powder-coated colours, a tilt and slide door can match the windows around it.
Daylight in Sidmouth and what it means for your glass
At the latitude of Sidmouth, the midday sun climbs to about 63° in late June but only about 16° in late December, when daylight lasts around 7 h 58 min against 16 h 29 min in midsummer. A south-facing tilt and slide door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Tilt and slide patio doors prices in Sidmouth
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
See every size on the tilt and slide doors page or try the guide price tool.
Timescales for tilt and slide doors in Sidmouth
Here is the usual sequence in Sidmouth: guide price, free survey, written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Honiton, Exmouth and Exeter.
Rules for tilt and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for tilt and slide doors
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
- Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
Questions about tilt and slide doors in Sidmouth
How soon can you survey in Sidmouth?
Surveys in the EX10 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off.
Do I need Building Regulations approval for a tilt and slide door?
A tilt and slide door replacing an existing door in England is a controlled fitting, so it must be fitted by an installer registered with a competent person scheme or notified to Building Control, and the glass must be safety glazing to BS EN 12600. Planning permission is not usually needed on a house when the door looks similar. Flats and listed buildings may need consent, and Wales, Scotland and Northern Ireland have their own rules.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.
Are tilt and slide doors draught-proof?
Tilt and slide doors are among the most draught-resistant sliding designs because the closed sash compresses gaskets on all four edges. Thermal performance depends on frame material and glass. In England, a replacement door in an existing home with more than 60% glazing must reach a U-value of 1.4 W/m²K or better, so the glass is specified to meet it. Wales, Scotland and Northern Ireland have their own requirements.