- Postcode district
- BH15
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Bournemouth, Wimborne Minster, Wareham
- Building rules
- England
Is a tilt and slide door a good fit for your home in Poole?
The right door depends on the opening, the room and the way you use the garden. Here is how tilt and slide doors tend to work out in practice:
Young children at home in Poole? A sliding restrictor, available on many systems, limits how far the sash opens while still letting air in.
Where an old patio door in Poole rattles or lets in draughts, a sash that seals on all four edges is a practical fix that keeps the same opening.
- Made in both uPVC and aluminium, in white, foiled or powder-coated colours, a tilt and slide door can match the windows around it.
- When closed, the sash is drawn back into the frame and presses onto gaskets on all four edges, giving a window-like seal against draughts and driving rain.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
Daylight in Poole and what it means for your glass
Sun angles matter for big glazed doors. Around Poole, midday sun reaches about 63° in summer and drops to about 16° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Typical costs for tilt and slide doors around Poole
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Poole home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.1 m | 2 panels | £2,395–£2,895 |
See every size on the tilt and slide doors page or try the guide price tool.
From survey to fitted door in Poole
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this.
Do you need approval in Poole?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your tilt and slide door
- Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Glass. Toughened or laminated double glazing, or triple glazing for extra warmth and sound reduction.
Questions about tilt and slide doors in Poole
Do you fit tilt and slide doors in Poole?
Yes. We survey and fit tilt and slide doors in Poole and across Dorset, including nearby Bournemouth and Wimborne Minster. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
What is a tilt and slide door?
A tilt and slide door is a patio door whose opening sash can either tilt inward at the top for ventilation, or move forward and slide parallel across the fixed panel. The handle selects the mode. When closed, the sash is pulled back into the frame and sealed on all four sides, so it behaves more like a large window than a conventional slider.
How do I maintain a tilt and slide door?
Maintaining a tilt and slide door means keeping the bottom track and drainage clear, wiping the gaskets with a damp cloth and lightly oiling the moving hardware points once a year. If the sash starts to catch or the handle feels stiff, the hinges and keeps can be adjusted rather than replaced. Gaskets that have flattened after many years can be renewed on their own, restoring the seal without a new sash.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.