- Postcode district
- SS16
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Stanford-le-Hope, Wickford, Billericay
- Building rules
- England
What tilt and slide doors offer homes in Basildon
Before you settle on a door type, it helps to know what tilt and slide doors do well and what to check before you order.
Is the opening in your Basildon home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
A kitchen in Basildon that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
- Made in both uPVC and aluminium, in white, foiled or powder-coated colours, a tilt and slide door can match the windows around it.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
Sunlight, glass and orientation in Basildon
Sun angles matter for big glazed doors. Around Basildon, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for tilt and slide doors in Basildon
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Basildon home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
How fitting works in Basildon
We plan the job around your home in Basildon: survey first, then a written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). The fitting itself usually takes 1 day for a straight swap in an existing opening. If you are in Stanford-le-Hope or Wickford, the same process and prices apply.
Do you need approval in Basildon?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for tilt and slide doors
- Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
Questions about tilt and slide doors in Basildon
How soon can you survey in Basildon?
Surveys in the SS16 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off.
Are tilt and slide doors draught-proof?
Tilt and slide doors are among the most draught-resistant sliding designs because the closed sash compresses gaskets on all four edges. Thermal performance depends on frame material and glass. In England, a replacement door in an existing home with more than 60% glazing must reach a U-value of 1.4 W/m²K or better, so the glass is specified to meet it. Wales, Scotland and Northern Ireland have their own requirements.
What is a tilt and slide door?
A tilt and slide door is a patio door whose opening sash can either tilt inward at the top for ventilation, or move forward and slide parallel across the fixed panel. The handle selects the mode. When closed, the sash is pulled back into the frame and sealed on all four sides, so it behaves more like a large window than a conventional slider.
How much does a tilt and slide patio door cost?
Tilt and slide patio doors start from a guide price of £1,995 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.1 m door is a guide £2,395–£2,895, and a 3 m door is around £2,995. Aluminium frames, colour and triple glazing move the figure up, and the final price is fixed in a written quote after survey.