- Postcode district
- TN23
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Tenterden, Hythe, Faversham
- Building rules
- England
Are tilt and slide doors right for your Ashford home?
The right door depends on the opening, the room and the way you use the garden. Here is how tilt and slide doors tend to work out in practice:
Is the opening in your Ashford home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
Where an old patio door in Ashford rattles or lets in draughts, a sash that seals on all four edges is a practical fix that keeps the same opening.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
Light and sun in Ashford
Sun angles matter for big glazed doors. Around Ashford, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for tilt and slide doors in Ashford?
Guide prices are the same across Kent: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 2.4 m | 2 panels | £2,595–£3,195 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
Timescales for tilt and slide doors in Ashford
Here is the usual sequence in Ashford: guide price, free survey, written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Tenterden, Hythe and Faversham.
Do you need approval in Ashford?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Choosing the specification
- Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
Questions about tilt and slide doors in Ashford
Is the price different in Ashford?
No. Guide prices for tilt and slide doors are the same across mainland Britain, including Ashford. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
What is a tilt and slide door?
A tilt and slide door is a patio door whose opening sash can either tilt inward at the top for ventilation, or move forward and slide parallel across the fixed panel. The handle selects the mode. When closed, the sash is pulled back into the frame and sealed on all four sides, so it behaves more like a large window than a conventional slider.
Are tilt and slide doors draught-proof?
Tilt and slide doors are among the most draught-resistant sliding designs because the closed sash compresses gaskets on all four edges. Thermal performance depends on frame material and glass. In England, a replacement door in an existing home with more than 60% glazing must reach a U-value of 1.4 W/m²K or better, so the glass is specified to meet it. Wales, Scotland and Northern Ireland have their own requirements.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.