- Postcode district
- LE17
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Rugby, Hinckley, Earl Shilton
- Building rules
- England
Are tilt and slide doors right for your Lutterworth home?
The right door depends on the opening, the room and the way you use the garden. Here is how tilt and slide doors tend to work out in practice:
A kitchen in Lutterworth that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
Young children at home in Lutterworth? A sliding restrictor, available on many systems, limits how far the sash opens while still letting air in.
- The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
Planning glass for the light in Lutterworth
Daylight in Lutterworth runs from about 7 h 40 min in December to 16 h 49 min in June, with the noon sun at roughly 14° and 61° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Typical costs for tilt and slide doors around Lutterworth
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
From survey to fitted door in Lutterworth
Here is the usual sequence in Lutterworth: guide price, free survey, written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Rugby, Hinckley and Earl Shilton.
Do you need approval in Lutterworth?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your tilt and slide door
- Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
Questions about tilt and slide doors in Lutterworth
How soon can you survey in Lutterworth?
Surveys in the LE17 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.
Are tilt and slide doors draught-proof?
Tilt and slide doors are among the most draught-resistant sliding designs because the closed sash compresses gaskets on all four edges. Thermal performance depends on frame material and glass. In England, a replacement door in an existing home with more than 60% glazing must reach a U-value of 1.4 W/m²K or better, so the glass is specified to meet it. Wales, Scotland and Northern Ireland have their own requirements.
Do I need Building Regulations approval for a tilt and slide door?
A tilt and slide door replacing an existing door in England is a controlled fitting, so it must be fitted by an installer registered with a competent person scheme or notified to Building Control, and the glass must be safety glazing to BS EN 12600. Planning permission is not usually needed on a house when the door looks similar. Flats and listed buildings may need consent, and Wales, Scotland and Northern Ireland have their own rules.