- Postcode district
- TD8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Kelso, Hawick, Selkirk
- Building rules
- Scotland
What tilt and slide doors offer homes in Jedburgh
A few practical points decide whether tilt and slide doors suit a particular room and opening:
For a flat in Jedburgh, check your lease or title deeds and speak to the managing agent, factor or other owners before replacing a balcony door, since flats can need consent that houses do not.
A kitchen in Jedburgh that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
- Made in both uPVC and aluminium, in white, foiled or powder-coated colours, a tilt and slide door can match the windows around it.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
Light and sun in Jedburgh
Daylight in Jedburgh runs from about 7 h 04 min in December to 17 h 29 min in June, with the noon sun at roughly 11° and 58° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Typical costs for tilt and slide doors around Jedburgh
Guide prices are the same across the Scottish Borders: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
See every size on the tilt and slide doors page or try the guide price tool.
From survey to fitted door in Jedburgh
A surveyor visits your Jedburgh home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off — and fitting usually takes 1 day for a straight swap in an existing opening. We also cover Kelso (15 km north-east) and Hawick (16 km south-west).
Rules for tilt and slide doors in Scotland
Scottish building standards still apply to a replacement door even where no warrant is needed, so the door must meet the energy and safety glazing requirements. If the opening is being formed or widened, a building warrant is required before work begins.
Specification choices for tilt and slide doors in Jedburgh
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
Questions about tilt and slide doors in Jedburgh
Do I need building approval for tilt and slide doors in Jedburgh?
In Scotland a like-for-like replacement door usually needs no building warrant, but must meet the building standards; new openings need a warrant. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How do I maintain a tilt and slide door?
Maintaining a tilt and slide door means keeping the bottom track and drainage clear, wiping the gaskets with a damp cloth and lightly oiling the moving hardware points once a year. If the sash starts to catch or the handle feels stiff, the hinges and keeps can be adjusted rather than replaced. Gaskets that have flattened after many years can be renewed on their own, restoring the seal without a new sash.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.