Tilt and slide patio doors across Somerset
Before you settle on a door type, it helps to know what tilt and slide doors do well and what to check before you order.
A kitchen in Somerset that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
Where an old patio door in Somerset rattles or lets in draughts, a sash that seals on all four edges is a practical fix that keeps the same opening.
- Tilting the sash lets steam and cooking smells out of a kitchen-diner in seconds, without the security worry of a door left wide open.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
Guide prices for tilt and slide doors in Somerset
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.4 m | 2 panels | £2,595–£3,195 |
| 3.0 m | 2 panels | £2,995–£3,595 |
Every size is on the tilt and slide doors page.
Daylight and glass in Somerset
Because Somerset sees long summer days (about 16 h 35 min) and short winter ones (about 7 h 52 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Towns we cover in Somerset
We survey and fit tilt and slide doors in 17 towns across Somerset, including the BA11, BA16, BA2, BA20, BA4, BA5 postcode districts.
Approvals in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Questions about tilt and slide doors in Somerset
Do I need building approval for tilt and slide doors in Somerset?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How do I maintain a tilt and slide door?
Maintaining a tilt and slide door means keeping the bottom track and drainage clear, wiping the gaskets with a damp cloth and lightly oiling the moving hardware points once a year. If the sash starts to catch or the handle feels stiff, the hinges and keeps can be adjusted rather than replaced. Gaskets that have flattened after many years can be renewed on their own, restoring the seal without a new sash.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.
Is a tilt and slide door safe to leave tilted?
A tilt and slide door in the tilt position opens only a narrow gap at the top, so it is far harder to get through than an open door, but it is not locked. Close and lock the sash whenever the house is empty. When closed, perimeter locking points hold the sash like a window, and systems are available tested to PAS 24.