- Postcode district
- WS13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Burntwood, Tamworth, Aldridge
- Building rules
- England
Is a tilt and slide door a good fit for your home in Lichfield?
Before you settle on a door type, it helps to know what tilt and slide doors do well and what to check before you order.
Where an old patio door in Lichfield rattles or lets in draughts, a sash that seals on all four edges is a practical fix that keeps the same opening.
If a bedroom in your Lichfield home opens onto a balcony or garden, the tilt position on tilt and slide doors lets in fresh air at night without leaving the door open.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
Planning glass for the light in Lichfield
Sun angles matter for big glazed doors. Around Lichfield, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Tilt and slide patio doors prices in Lichfield
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.4 m | 2 panels | £2,595–£3,195 |
See every size on the tilt and slide doors page or try the guide price tool.
Timescales for tilt and slide doors in Lichfield
A surveyor visits your Lichfield home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off — and fitting usually takes 1 day for a straight swap in an existing opening. We also cover Burntwood (7 km west) and Tamworth (10 km south-east).
Rules for tilt and slide doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Which options matter for tilt and slide doors?
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
- Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
Questions about tilt and slide doors in Lichfield
Do you fit tilt and slide doors in Lichfield?
Yes. We survey and fit tilt and slide doors in Lichfield and across Staffordshire, including nearby Burntwood and Tamworth. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
What is a tilt and slide door?
A tilt and slide door is a patio door whose opening sash can either tilt inward at the top for ventilation, or move forward and slide parallel across the fixed panel. The handle selects the mode. When closed, the sash is pulled back into the frame and sealed on all four sides, so it behaves more like a large window than a conventional slider.
Do I need Building Regulations approval for a tilt and slide door?
A tilt and slide door replacing an existing door in England is a controlled fitting, so it must be fitted by an installer registered with a competent person scheme or notified to Building Control, and the glass must be safety glazing to BS EN 12600. Planning permission is not usually needed on a house when the door looks similar. Flats and listed buildings may need consent, and Wales, Scotland and Northern Ireland have their own rules.
Are tilt and slide doors draught-proof?
Tilt and slide doors are among the most draught-resistant sliding designs because the closed sash compresses gaskets on all four edges. Thermal performance depends on frame material and glass. In England, a replacement door in an existing home with more than 60% glazing must reach a U-value of 1.4 W/m²K or better, so the glass is specified to meet it. Wales, Scotland and Northern Ireland have their own requirements.