- Postcode district
- B69
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- West Bromwich, Smethwick, Dudley
- Building rules
- England
Why choose tilt and slide doors in Oldbury?
Most homeowners choosing tilt and slide doors want the same things: more light, a clear view and a door that is easy to live with.
A kitchen in Oldbury that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
Young children at home in Oldbury? A sliding restrictor, available on many systems, limits how far the sash opens while still letting air in.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
- Tilting the sash lets steam and cooking smells out of a kitchen-diner in seconds, without the security worry of a door left wide open.
How much sun will a door in Oldbury get?
Sun angles matter for big glazed doors. Around Oldbury, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do tilt and slide doors cost in Oldbury?
Guide prices are the same across the West Midlands: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.4 m | 2 panels | £2,595–£3,195 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
How fitting works in Oldbury
A surveyor visits your Oldbury home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off — and fitting usually takes 1 day for a straight swap in an existing opening. We also cover West Bromwich (3 km north-east) and Smethwick (3 km east).
Rules for tilt and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for tilt and slide doors?
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
Questions about tilt and slide doors in Oldbury
How soon can you survey in Oldbury?
Surveys in the B69 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.
How do I maintain a tilt and slide door?
Maintaining a tilt and slide door means keeping the bottom track and drainage clear, wiping the gaskets with a damp cloth and lightly oiling the moving hardware points once a year. If the sash starts to catch or the handle feels stiff, the hinges and keeps can be adjusted rather than replaced. Gaskets that have flattened after many years can be renewed on their own, restoring the seal without a new sash.