- Postcode district
- RH10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Horley, Horsham, East Grinstead
- Building rules
- England
Tilt and slide patio doors in Crawley: what to know
A few practical points decide whether tilt and slide doors suit a particular room and opening:
Is the opening in your Crawley home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
A kitchen in Crawley that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
- Tilting the sash lets steam and cooking smells out of a kitchen-diner in seconds, without the security worry of a door left wide open.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
Light and sun in Crawley
At the latitude of Crawley, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 53 min against 16 h 34 min in midsummer. A south-facing tilt and slide door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Typical costs for tilt and slide doors around Crawley
Pricing is transparent and does not change because you are in Crawley. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
From survey to fitted door in Crawley
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this.
Rules for tilt and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for tilt and slide doors?
- Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
- Glass. Toughened or laminated double glazing, or triple glazing for extra warmth and sound reduction.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
Questions about tilt and slide doors in Crawley
Can you match other doors and windows in my Crawley home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.
Do I need Building Regulations approval for a tilt and slide door?
A tilt and slide door replacing an existing door in England is a controlled fitting, so it must be fitted by an installer registered with a competent person scheme or notified to Building Control, and the glass must be safety glazing to BS EN 12600. Planning permission is not usually needed on a house when the door looks similar. Flats and listed buildings may need consent, and Wales, Scotland and Northern Ireland have their own rules.
How do I maintain a tilt and slide door?
Maintaining a tilt and slide door means keeping the bottom track and drainage clear, wiping the gaskets with a damp cloth and lightly oiling the moving hardware points once a year. If the sash starts to catch or the handle feels stiff, the hinges and keeps can be adjusted rather than replaced. Gaskets that have flattened after many years can be renewed on their own, restoring the seal without a new sash.