- Postcode district
- AB39
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Portlethen, Banchory, Aberdeen
- Building rules
- Scotland
Why choose timber and alu-clad sliding doors in Stonehaven?
A few practical points decide whether timber and alu-clad sliding doors suit a particular room and opening:
Because timber and alu-clad sliding doors typically take 8–10 weeks to make, a Stonehaven building programme runs more smoothly when the survey happens as soon as the opening size is fixed.
For a listed building or a house in a conservation area in Stonehaven, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
- Engineered timber is laminated from several layers with the grain opposed, so frames resist the twisting and warping that solid timber can suffer as the seasons change.
- Wood is a natural insulator, so timber frames feel warm to the touch in winter and help keep condensation off the inside face of the frame.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
Daylight in Stonehaven and what it means for your glass
Daylight in Stonehaven runs from about 6 h 43 min in December to 17 h 53 min in June, with the noon sun at roughly 10° and 56° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do timber and alu-clad sliding doors cost in Stonehaven?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Stonehaven home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,995–£7,395 |
| 3.0 m | 2 panels | £7,495–£9,095 |
| 3.6 m | 3 panels | £8,395–£10,295 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Stonehaven
A surveyor visits your Stonehaven home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 8–10 weeks from survey sign-off — and fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors. We also cover Portlethen (11 km north-east) and Banchory (19 km north-west).
Do you need approval in Stonehaven?
In Scotland, replacing a door like for like in a house does not usually need a building warrant, but the new door must still meet the Scottish building standards for energy and safety. Forming or widening an opening is different: that needs a building warrant from the council before work starts.
Choosing the specification
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Alu-cladding. A powder-coated aluminium outer shell in a standard or RAL colour, with timber left on show inside.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
Questions about timber and alu-clad sliding doors in Stonehaven
How soon can you survey in Stonehaven?
Surveys in the AB39 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 8–10 weeks from survey sign-off.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
What is the difference between timber and alu-clad sliding doors?
The difference is the outside face: a timber sliding door is wood inside and out, while an alu-clad door has a powder-coated aluminium shell fixed over the exterior timber. Alu-clad needs only washing outside and comes in any RAL colour; all-timber needs periodic re-coating but keeps a natural wood look on both faces. The inside is timber either way.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.