Timber and alu-clad sliding doors across Ayrshire
A few practical points decide whether timber and alu-clad sliding doors suit a particular room and opening:
For a listed building or a house in a conservation area in Ayrshire, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
Because timber and alu-clad sliding doors typically take 8–10 weeks to make, an Ayrshire building programme runs more smoothly when the survey happens as soon as the opening size is fixed.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
Guide prices for timber and alu-clad sliding doors in Ayrshire
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £6,495–£7,995 |
| 4.0 m | 3 panels | £9,095–£11,095 |
| 4.8 m | 4 panels | £10,395–£12,595 |
Every size is on the timber and alu-clad sliding doors page.
Daylight and glass in Ayrshire
Sun angles matter for big glazed doors. Around Ayrshire, midday sun reaches about 58° in summer and drops to about 11° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Towns we cover in Ayrshire
We survey and fit timber and alu-clad sliding doors in 11 towns across Ayrshire, including the KA1, KA10, KA12, KA18, KA21, KA22 postcode districts.
Approvals in Scotland
Scottish building standards still apply to a replacement door even where no warrant is needed, so the door must meet the energy and safety glazing requirements. If the opening is being formed or widened, a building warrant is required before work begins.
Questions about timber and alu-clad sliding doors in Ayrshire
Do you fit timber and alu-clad sliding doors in Ayrshire?
Yes. We survey and fit timber and alu-clad sliding doors in Ayrshire and across Ayrshire, including Kilmarnock and Ayr. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
How much do timber sliding doors cost?
Timber and alu-clad sliding doors start from a guide price of £5,095 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £6,495–£7,995, and a 4.8 m four-panel door is around £10,395. Species, cladding, finish and glass all affect the figure, and the final price is fixed in a written quote after survey.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.