- Postcode district
- BT56
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Portstewart, Coleraine, Ballymoney
- Building rules
- Northern Ireland
Timber and alu-clad sliding doors in Portrush: what to know
These are the points a surveyor will go through with you when you choose timber and alu-clad sliding doors for a home in Portrush:
Where the back of a Portrush home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
If your Portrush home is a period property or a barn conversion, timber and alu-clad sliding doors can bring in more light without the modern look of a metal frame.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
Sunlight, glass and orientation in Portrush
Daylight in Portrush runs from about 7 h 07 min in December to 17 h 25 min in June, with the noon sun at roughly 11° and 58° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for timber and alu-clad sliding doors in Portrush
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Portrush home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,995–£7,395 |
| 3.0 m | 2 panels | £7,495–£9,095 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
How fitting works in Portrush
A surveyor visits your Portrush home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 8–10 weeks from survey sign-off — and fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors. We also cover Portstewart (4 km west) and Coleraine (7 km south). Portrush is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Do you need approval in Portrush?
Building control in Northern Ireland is run by district councils under the Building Regulations (Northern Ireland). We take on work in Northern Ireland by arrangement and confirm what approval your door needs before anything is ordered.
Specification choices for timber and alu-clad sliding doors in Portrush
- Handles. Traditional or contemporary handles in bronze, black, satin chrome or brass-effect finishes.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
Questions about timber and alu-clad sliding doors in Portrush
Is the price different in Portrush?
The door price is the same as anywhere else. Because Portrush is covered by arrangement, any travel cost for delivery and fitting is shown in your quote before you order; the survey itself is free.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.
How much do timber sliding doors cost?
Timber and alu-clad sliding doors start from a guide price of £5,095 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £6,495–£7,995, and a 4.8 m four-panel door is around £10,395. Species, cladding, finish and glass all affect the figure, and the final price is fixed in a written quote after survey.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.