- Postcode district
- TN22
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Crowborough, Heathfield, Lewes
- Building rules
- England
What timber and alu-clad sliding doors offer homes in Uckfield
The right door depends on the opening, the room and the way you use the garden. Here is how timber and alu-clad sliding doors tend to work out in practice:
Where the back of an Uckfield home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
Because timber and alu-clad sliding doors typically take 8–10 weeks to make, an Uckfield building programme runs more smoothly when the survey happens as soon as the opening size is fixed.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
- Wood is a natural insulator, so timber frames feel warm to the touch in winter and help keep condensation off the inside face of the frame.
Light and sun in Uckfield
At the latitude of Uckfield, the midday sun climbs to about 62° in late June but only about 16° in late December, when daylight lasts around 7 h 55 min against 16 h 32 min in midsummer. A south-facing timber and alu-clad sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
What should you budget for timber and alu-clad sliding doors in Uckfield?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Uckfield home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,595–£6,795 |
| 3.0 m | 2 panels | £7,495–£9,095 |
| 4.0 m | 3 panels | £9,095–£11,095 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
From survey to fitted door in Uckfield
Surveys in the TN22 district are booked at a time that suits you. After you approve the quote, manufacture is typically 8–10 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors.
Rules for timber and alu-clad sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for timber and alu-clad sliding doors
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Alu-cladding. A powder-coated aluminium outer shell in a standard or RAL colour, with timber left on show inside.
Questions about timber and alu-clad sliding doors in Uckfield
How soon can you survey in Uckfield?
Surveys in the TN22 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 8–10 weeks from survey sign-off.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
Can I fit timber sliding doors to a listed building or in a conservation area?
Timber sliding doors can suit listed buildings and conservation areas, but listed buildings and properties under an Article 4 direction may need consent before any door is changed, so check with your local planning authority first. In England, replacing doors on an ordinary house with similar-looking ones is usually permitted development. Wales, Scotland and Northern Ireland have their own planning rules.