- Postcode district
- GL7
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Stroud, Cheltenham, Swindon
- Building rules
- England
What timber and alu-clad sliding doors offer homes in Cirencester
These are the points a surveyor will go through with you when you choose timber and alu-clad sliding doors for a home in Cirencester:
Where the back of a Cirencester home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
Because timber and alu-clad sliding doors typically take 8–10 weeks to make, a Cirencester building programme runs more smoothly when the survey happens as soon as the opening size is fixed.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
- Engineered timber is laminated from several layers with the grain opposed, so frames resist the twisting and warping that solid timber can suffer as the seasons change.
Light and sun in Cirencester
At the latitude of Cirencester, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 47 min against 16 h 41 min in midsummer. A south-facing timber and alu-clad sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
What should you budget for timber and alu-clad sliding doors in Cirencester?
Pricing is transparent and does not change because you are in Cirencester. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 3.6 m | 3 panels | £8,395–£10,295 |
| 4.0 m | 3 panels | £9,095–£11,095 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
Timescales for timber and alu-clad sliding doors in Cirencester
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 8–10 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Cirencester?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your timber and alu-clad sliding door
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Alu-cladding. A powder-coated aluminium outer shell in a standard or RAL colour, with timber left on show inside.
Questions about timber and alu-clad sliding doors in Cirencester
How soon can you survey in Cirencester?
Surveys in the GL7 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 8–10 weeks from survey sign-off.
How much do timber sliding doors cost?
Timber and alu-clad sliding doors start from a guide price of £5,095 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £6,495–£7,995, and a 4.8 m four-panel door is around £10,395. Species, cladding, finish and glass all affect the figure, and the final price is fixed in a written quote after survey.
Are timber sliding doors energy efficient?
Timber sliding doors are energy efficient because wood insulates naturally, and engineered timber systems typically achieve whole-door U-values comparable with good thermally broken aluminium, depending on the glass. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, and the glazing is specified to meet that. Wales, Scotland and Northern Ireland set their own energy rules.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.