- Postcode district
- TW13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Hounslow, Twickenham, Teddington
- Building rules
- England
Why choose timber and alu-clad sliding doors in Feltham?
These are the points a surveyor will go through with you when you choose timber and alu-clad sliding doors for a home in Feltham:
Oak floors, exposed beams or a timber kitchen in your Feltham home? Matching the inside finish of the door ties the new glazing into the room.
Where the back of a Feltham home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
- Stains, paints and lacquers are sprayed in the factory under controlled conditions, giving a more even and longer-lasting coat than a finish brushed on site.
Daylight in Feltham and what it means for your glass
In Feltham the shortest day has roughly 7 h 50 min of daylight and the longest about 16 h 38 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Timber and alu-clad sliding doors prices in Feltham
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Feltham home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,995–£7,395 |
| 2.4 m | 2 panels | £6,495–£7,995 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Feltham
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 8–10 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel swap; 1–2 days for larger doors for a door like this.
Rules for timber and alu-clad sliding doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Specification choices for timber and alu-clad sliding doors in Feltham
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
Questions about timber and alu-clad sliding doors in Feltham
Do you fit timber and alu-clad sliding doors in Feltham?
Yes. We survey and fit timber and alu-clad sliding doors in Feltham and across Greater London, including nearby Hounslow and Twickenham. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
Can I fit timber sliding doors to a listed building or in a conservation area?
Timber sliding doors can suit listed buildings and conservation areas, but listed buildings and properties under an Article 4 direction may need consent before any door is changed, so check with your local planning authority first. In England, replacing doors on an ordinary house with similar-looking ones is usually permitted development. Wales, Scotland and Northern Ireland have their own planning rules.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.