- Postcode district
- E8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Stoke Newington, Highbury, Islington
- Building rules
- England
Is a timber and alu-clad sliding door a good fit for your home in Hackney?
A few practical points decide whether timber and alu-clad sliding doors suit a particular room and opening:
Where the back of a Hackney home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
Because timber and alu-clad sliding doors typically take 8–10 weeks to make, a Hackney building programme runs more smoothly when the survey happens as soon as the opening size is fixed.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
- Wood is a natural insulator, so timber frames feel warm to the touch in winter and help keep condensation off the inside face of the frame.
Daylight in Hackney and what it means for your glass
In Hackney the shortest day has roughly 7 h 49 min of daylight and the longest about 16 h 39 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Typical costs for timber and alu-clad sliding doors around Hackney
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,595–£6,795 |
| 2.4 m | 2 panels | £6,495–£7,995 |
| 4.0 m | 3 panels | £9,095–£11,095 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
Timescales for timber and alu-clad sliding doors in Hackney
Surveys in the E8 district are booked at a time that suits you. After you approve the quote, manufacture is typically 8–10 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors.
Do you need approval in Hackney?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for timber and alu-clad sliding doors
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
Questions about timber and alu-clad sliding doors in Hackney
Is the price different in Hackney?
No. Guide prices for timber and alu-clad sliding doors are the same across mainland Britain, including Hackney. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Can I fit timber sliding doors to a listed building or in a conservation area?
Timber sliding doors can suit listed buildings and conservation areas, but listed buildings and properties under an Article 4 direction may need consent before any door is changed, so check with your local planning authority first. In England, replacing doors on an ordinary house with similar-looking ones is usually permitted development. Wales, Scotland and Northern Ireland have their own planning rules.
What is the difference between timber and alu-clad sliding doors?
The difference is the outside face: a timber sliding door is wood inside and out, while an alu-clad door has a powder-coated aluminium shell fixed over the exterior timber. Alu-clad needs only washing outside and comes in any RAL colour; all-timber needs periodic re-coating but keeps a natural wood look on both faces. The inside is timber either way.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.