- Postcode district
- SW16
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Balham, Tooting, Dulwich
- Building rules
- England
Timber and alu-clad sliding doors in Streatham: what to know
Here is what to weigh up if you are considering timber and alu-clad sliding doors for a home in Streatham:
For a listed building or a house in a conservation area in Streatham, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
If your Streatham home is a period property or a barn conversion, timber and alu-clad sliding doors can bring in more light without the modern look of a metal frame.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
Sunlight, glass and orientation in Streatham
The midday sun over Streatham ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Guide prices for timber and alu-clad sliding doors in Streatham
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Streatham home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 3.0 m | 2 panels | £7,495–£9,095 |
| 3.6 m | 3 panels | £8,395–£10,295 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Streatham
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 8–10 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Streatham?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for timber and alu-clad sliding doors?
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
Questions about timber and alu-clad sliding doors in Streatham
Do you fit timber and alu-clad sliding doors in Streatham?
Yes. We survey and fit timber and alu-clad sliding doors in Streatham and across Greater London, including nearby Balham and Tooting. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Can I fit timber sliding doors to a listed building or in a conservation area?
Timber sliding doors can suit listed buildings and conservation areas, but listed buildings and properties under an Article 4 direction may need consent before any door is changed, so check with your local planning authority first. In England, replacing doors on an ordinary house with similar-looking ones is usually permitted development. Wales, Scotland and Northern Ireland have their own planning rules.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.
Are timber sliding doors energy efficient?
Timber sliding doors are energy efficient because wood insulates naturally, and engineered timber systems typically achieve whole-door U-values comparable with good thermally broken aluminium, depending on the glass. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, and the glazing is specified to meet that. Wales, Scotland and Northern Ireland set their own energy rules.