- Postcode district
- LL57
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Beaumaris, Llangefni, Caernarfon
- Building rules
- Wales
Why choose timber and alu-clad sliding doors in Bangor (Gwynedd)?
A few practical points decide whether timber and alu-clad sliding doors suit a particular room and opening:
Whether you live in Bangor (Gwynedd) or elsewhere in Gwynedd, an exposed coastal or hilltop elevation makes a strong case for alu-clad rather than all-timber outside.
Where the back of a Bangor (Gwynedd) home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
- Engineered timber is laminated from several layers with the grain opposed, so frames resist the twisting and warping that solid timber can suffer as the seasons change.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
Daylight in Bangor (Gwynedd) and what it means for your glass
Sun angles matter for big glazed doors. Around Bangor (Gwynedd), midday sun reaches about 60° in summer and drops to about 13° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for timber and alu-clad sliding doors in Bangor (Gwynedd)?
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 1.8 m | 2 panels | £5,595–£6,795 |
| 3.6 m | 3 panels | £8,395–£10,295 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
How fitting works in Bangor (Gwynedd)
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 8–10 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Bangor (Gwynedd)?
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Options to consider for your timber and alu-clad sliding door
- Handles. Traditional or contemporary handles in bronze, black, satin chrome or brass-effect finishes.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
Questions about timber and alu-clad sliding doors in Bangor (Gwynedd)
Do you fit timber and alu-clad sliding doors in Bangor (Gwynedd)?
Yes. We survey and fit timber and alu-clad sliding doors in Bangor (Gwynedd) and across Gwynedd, including nearby Beaumaris and Llangefni. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Are timber sliding doors secure?
Timber sliding doors are secure when built with multi-point locking, laminated glass and robust sections, because engineered timber gives the locking keeps a solid, dense fixing. Timber systems are available tested to PAS 24, the UK enhanced security test standard for doorsets. Internally beaded glass and a key-locking handle add further resistance to forced entry.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.
How much do timber sliding doors cost?
Timber and alu-clad sliding doors start from a guide price of £5,095 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £6,495–£7,995, and a 4.8 m four-panel door is around £10,395. Species, cladding, finish and glass all affect the figure, and the final price is fixed in a written quote after survey.