- Postcode district
- SO50
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Southampton, Romsey, Winchester
- Building rules
- England
What timber and alu-clad sliding doors offer homes in Eastleigh
Here is what to weigh up if you are considering timber and alu-clad sliding doors for a home in Eastleigh:
Oak floors, exposed beams or a timber kitchen in your Eastleigh home? Matching the inside finish of the door ties the new glazing into the room.
Whether you live in Eastleigh or elsewhere in Hampshire, an exposed coastal or hilltop elevation makes a strong case for alu-clad rather than all-timber outside.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
- Stains, paints and lacquers are sprayed in the factory under controlled conditions, giving a more even and longer-lasting coat than a finish brushed on site.
Sunlight, glass and orientation in Eastleigh
In Eastleigh the shortest day has roughly 7 h 55 min of daylight and the longest about 16 h 32 min. The noon sun sits near 16° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Timber and alu-clad sliding doors prices in Eastleigh
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Eastleigh home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 2.1 m | 2 panels | £5,995–£7,395 |
| 3.6 m | 3 panels | £8,395–£10,295 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
How fitting works in Eastleigh
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 8–10 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel swap; 1–2 days for larger doors for a door like this.
Rules for timber and alu-clad sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for timber and alu-clad sliding doors?
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
Questions about timber and alu-clad sliding doors in Eastleigh
Is the price different in Eastleigh?
No. Guide prices for timber and alu-clad sliding doors are the same across mainland Britain, including Eastleigh. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
Can I fit timber sliding doors to a listed building or in a conservation area?
Timber sliding doors can suit listed buildings and conservation areas, but listed buildings and properties under an Article 4 direction may need consent before any door is changed, so check with your local planning authority first. In England, replacing doors on an ordinary house with similar-looking ones is usually permitted development. Wales, Scotland and Northern Ireland have their own planning rules.