- Postcode district
- HR9
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Monmouth, Ledbury, Hereford
- Building rules
- England
Are timber and alu-clad sliding doors right for your Ross-on-Wye home?
A few practical points decide whether timber and alu-clad sliding doors suit a particular room and opening:
Whether you live in Ross-on-Wye or elsewhere in Herefordshire, an exposed coastal or hilltop elevation makes a strong case for alu-clad rather than all-timber outside.
If your Ross-on-Wye home is a period property or a barn conversion, timber and alu-clad sliding doors can bring in more light without the modern look of a metal frame.
- Stains, paints and lacquers are sprayed in the factory under controlled conditions, giving a more even and longer-lasting coat than a finish brushed on site.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
Daylight in Ross-on-Wye and what it means for your glass
Daylight in Ross-on-Wye runs from about 7 h 45 min in December to 16 h 43 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Timber and alu-clad sliding doors prices in Ross-on-Wye
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Ross-on-Wye home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 1.8 m | 2 panels | £5,595–£6,795 |
| 3.6 m | 3 panels | £8,395–£10,295 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Ross-on-Wye
We plan the job around your home in Ross-on-Wye: survey first, then a written quote, then manufacture (typically 8–10 weeks from survey sign-off). The fitting itself usually takes 1 day for a two-panel swap; 1–2 days for larger doors. If you are in Monmouth or Ledbury, the same process and prices apply.
Do you need approval in Ross-on-Wye?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Alu-cladding. A powder-coated aluminium outer shell in a standard or RAL colour, with timber left on show inside.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
Questions about timber and alu-clad sliding doors in Ross-on-Wye
Do you fit timber and alu-clad sliding doors in Ross-on-Wye?
Yes. We survey and fit timber and alu-clad sliding doors in Ross-on-Wye and across Herefordshire, including nearby Monmouth and Ledbury. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
Are timber sliding doors secure?
Timber sliding doors are secure when built with multi-point locking, laminated glass and robust sections, because engineered timber gives the locking keeps a solid, dense fixing. Timber systems are available tested to PAS 24, the UK enhanced security test standard for doorsets. Internally beaded glass and a key-locking handle add further resistance to forced entry.