Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Timber and alu-clad sliding doors
Timber and alu-clad sliding doors · England

Timber and alu-clad sliding doors in North Yorkshire

From the first guide price to the finished threshold, we handle timber and alu-clad sliding doors for homes in North Yorkshire : survey, made-to-measure manufacture and fitting.

Timber and alu-clad sliding doors across North Yorkshire

These are the points a surveyor will go through with you when you choose timber and alu-clad sliding doors for a home in North Yorkshire:

If your North Yorkshire home is a period property or a barn conversion, timber and alu-clad sliding doors can bring in more light without the modern look of a metal frame.

Where the back of a North Yorkshire home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.

  • Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
  • Stains, paints and lacquers are sprayed in the factory under controlled conditions, giving a more even and longer-lasting coat than a finish brushed on site.
  • A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.

Guide prices for timber and alu-clad sliding doors in North Yorkshire

The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your home has been measured.

Guide prices for timber and alu-clad sliding doors in North Yorkshire
Overall widthTypical panelsGuide price (fitted, inc VAT)
1.5 m2 panels£5,095–£6,195
3.0 m2 panels£7,495–£9,095
3.6 m3 panels£8,395–£10,295
4.8 m4 panels£10,395–£12,595

Every size is on the timber and alu-clad sliding doors page.

Daylight and glass in North Yorkshire

June 59°Dec 12°

The midday sun over North Yorkshire ranges from about 12° at the winter solstice to about 59° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.

Towns we cover in North Yorkshire

We survey and fit timber and alu-clad sliding doors in 15 towns across North Yorkshire, including the BD23, DL6, HG1, HG4, HG5, TS1 postcode districts.

Approvals in England

In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.

Questions about timber and alu-clad sliding doors in North Yorkshire

How soon can you survey in North Yorkshire?

Surveys in North Yorkshire are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 8–10 weeks from survey sign-off.

How often do timber sliding doors need treating?

Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.

Are timber sliding doors secure?

Timber sliding doors are secure when built with multi-point locking, laminated glass and robust sections, because engineered timber gives the locking keeps a solid, dense fixing. Timber systems are available tested to PAS 24, the UK enhanced security test standard for doorsets. Internally beaded glass and a key-locking handle add further resistance to forced entry.

How big can a timber sliding door be?

A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.

Timber and alu-clad sliding doors in neighbouring areas

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote