- Postcode district
- CF62
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Dinas Powys, Penarth, Cardiff
- Building rules
- Wales
Is a timber and alu-clad sliding door a good fit for your home in Barry?
Before you settle on a door type, it helps to know what timber and alu-clad sliding doors do well and what to check before you order.
For a listed building or a house in a conservation area in Barry, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
Because timber and alu-clad sliding doors typically take 8–10 weeks to make, a Barry building programme runs more smoothly when the survey happens as soon as the opening size is fixed.
- Wood is a natural insulator, so timber frames feel warm to the touch in winter and help keep condensation off the inside face of the frame.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
Light and sun in Barry
Because Barry sees long summer days (about 16 h 37 min) and short winter ones (about 7 h 51 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do timber and alu-clad sliding doors cost in Barry?
Guide prices are the same across South Glamorgan: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £6,495–£7,995 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
How fitting works in Barry
Surveys in the CF62 district are booked at a time that suits you. After you approve the quote, manufacture is typically 8–10 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors.
Do you need approval in Barry?
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Choosing the specification
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
Questions about timber and alu-clad sliding doors in Barry
Do I need building approval for timber and alu-clad sliding doors in Barry?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How much do timber sliding doors cost?
Timber and alu-clad sliding doors start from a guide price of £5,095 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £6,495–£7,995, and a 4.8 m four-panel door is around £10,395. Species, cladding, finish and glass all affect the figure, and the final price is fixed in a written quote after survey.
How big can a timber sliding door be?
A timber sliding door in our range is typically about 1.5 m to 4.8 m wide overall, in two to four panels, at standard 2.1 m height or taller on request. Individual panel sizes depend on the system and glass weight; larger panels usually move to lift and slide hardware so they stay easy to open. Sizes are confirmed after survey.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.