- Postcode district
- WS11
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Burntwood, Rugeley, Willenhall
- Building rules
- England
Why choose timber and alu-clad sliding doors in Cannock?
These are the points a surveyor will go through with you when you choose timber and alu-clad sliding doors for a home in Cannock:
Where the back of a Cannock home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
If your Cannock home is a period property or a barn conversion, timber and alu-clad sliding doors can bring in more light without the modern look of a metal frame.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
- Many timber systems use lift and slide hardware, letting large, heavy panels glide easily and then settle onto compressed seals for a tight closure.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
How much sun will a door in Cannock get?
Sun angles matter for big glazed doors. Around Cannock, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for timber and alu-clad sliding doors in Cannock
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 2.1 m | 2 panels | £5,995–£7,395 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
From survey to fitted door in Cannock
Surveys in the WS11 district are booked at a time that suits you. After you approve the quote, manufacture is typically 8–10 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a two-panel swap; 1–2 days for larger doors.
Rules for timber and alu-clad sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
- Timber species. Oak or another hardwood for a visible grain, or engineered softwood where a painted finish is planned.
- Glass. Double or triple glazed safety glass, with slim glazing bars available for a period look.
Questions about timber and alu-clad sliding doors in Cannock
Do you fit timber and alu-clad sliding doors in Cannock?
Yes. We survey and fit timber and alu-clad sliding doors in Cannock and across Staffordshire, including nearby Burntwood and Rugeley. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much do timber sliding doors cost?
Timber and alu-clad sliding doors start from a guide price of £5,095 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £6,495–£7,995, and a 4.8 m four-panel door is around £10,395. Species, cladding, finish and glass all affect the figure, and the final price is fixed in a written quote after survey.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.