Timber and alu-clad sliding doors across Warwickshire
A few practical points decide whether timber and alu-clad sliding doors suit a particular room and opening:
Where the back of a Warwickshire home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
Oak floors, exposed beams or a timber kitchen in your Warwickshire home? Matching the inside finish of the door ties the new glazing into the room.
- Scratches and dents on internal timber faces can usually be sanded and refinished locally, rather than needing a whole panel replaced.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
- An alu-clad exterior shields the wood from rain and sunlight, so the outside needs only washing while the inside keeps a natural timber finish.
Guide prices for timber and alu-clad sliding doors in Warwickshire
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 2.1 m | 2 panels | £5,995–£7,395 |
| 2.4 m | 2 panels | £6,495–£7,995 |
| 3.6 m | 3 panels | £8,395–£10,295 |
Every size is on the timber and alu-clad sliding doors page.
Daylight and glass in Warwickshire
The midday sun over Warwickshire ranges from about 14° at the winter solstice to about 61° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Towns we cover in Warwickshire
We survey and fit timber and alu-clad sliding doors in 10 towns across Warwickshire, including the B49, CV11, CV12, CV21, CV31, CV34 postcode districts.
Approvals in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Questions about timber and alu-clad sliding doors in Warwickshire
Can you match other doors and windows in my Warwickshire home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
What is the difference between timber and alu-clad sliding doors?
The difference is the outside face: a timber sliding door is wood inside and out, while an alu-clad door has a powder-coated aluminium shell fixed over the exterior timber. Alu-clad needs only washing outside and comes in any RAL colour; all-timber needs periodic re-coating but keeps a natural wood look on both faces. The inside is timber either way.
Are timber sliding doors energy efficient?
Timber sliding doors are energy efficient because wood insulates naturally, and engineered timber systems typically achieve whole-door U-values comparable with good thermally broken aluminium, depending on the glass. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, and the glazing is specified to meet that. Wales, Scotland and Northern Ireland set their own energy rules.