- Postcode district
- LS1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 8–10 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Morley, Horsforth, Yeadon
- Building rules
- England
Is a timber and alu-clad sliding door a good fit for your home in Leeds?
A few practical points decide whether timber and alu-clad sliding doors suit a particular room and opening:
Where the back of a Leeds home faces south and takes full sun, choosing alu-clad keeps the timber protected and cuts out the re-coating that strong sunlight makes necessary.
For a listed building or a house in a conservation area in Leeds, check with the local planning authority before choosing any new door; timber frames are often closer in character to the original joinery.
- The inside face can be finished to match existing oak floors, stair parts or window boards, so the new door feels part of the room rather than an addition.
- A timber sliding door sits comfortably beside brick, stone, render or weatherboarding, which helps where a modern metal frame would look out of character.
- Stains, paints and lacquers are sprayed in the factory under controlled conditions, giving a more even and longer-lasting coat than a finish brushed on site.
Sunlight, glass and orientation in Leeds
At the latitude of Leeds, the midday sun climbs to about 60° in late June but only about 13° in late December, when daylight lasts around 7 h 25 min against 17 h 06 min in midsummer. A south-facing timber and alu-clad sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
How much do timber and alu-clad sliding doors cost in Leeds?
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £5,095–£6,195 |
| 1.8 m | 2 panels | £5,595–£6,795 |
| 4.8 m | 4 panels | £10,395–£12,595 |
See every size on the timber and alu-clad sliding doors page or try the guide price tool.
What happens when you order timber and alu-clad sliding doors in Leeds?
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 8–10 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Leeds?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your timber and alu-clad sliding door
- Handles. Traditional or contemporary handles in bronze, black, satin chrome or brass-effect finishes.
- Interior finish. Clear lacquer, a wood stain or a painted colour, chosen to match floors, beams or kitchen units.
- Sliding hardware. Inline rollers on smaller doors, or lift and slide gear for larger and heavier panels.
Questions about timber and alu-clad sliding doors in Leeds
Do I need building approval for timber and alu-clad sliding doors in Leeds?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How often do timber sliding doors need treating?
Timber sliding doors need the outside re-coated every few years, depending on how exposed the elevation is and which finish system is used; doors facing full sun or coastal weather need attention soonest. Alu-clad doors avoid this, needing only an occasional wash outside. Inside, timber only needs wiping and an occasional refresh of the lacquer or oil, and a clean track protects the rollers.
How much do timber sliding doors cost?
Timber and alu-clad sliding doors start from a guide price of £5,095 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £6,495–£7,995, and a 4.8 m four-panel door is around £10,395. Species, cladding, finish and glass all affect the figure, and the final price is fixed in a written quote after survey.
How long do timber sliding doors take to make?
Timber and alu-clad sliding doors typically take 8–10 weeks to make after survey sign-off, longer than metal or uPVC, because each door is joinery-made, factory finished and allowed to cure before delivery. Fitting typically takes 1 day for a two-panel swap and 1–2 days for larger doors. These are typical timescales, confirmed once your order is placed.