- Postcode district
- CH5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Connah's Quay, Buckley, Mold
- Building rules
- Wales
uPVC sliding patio doors in Deeside: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how uPVC sliding patio doors tend to work out in practice:
If the windows on your Deeside home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.
Where a patio door in Deeside opens onto a conservatory or narrow side return, a sliding panel avoids the clash a hinged door can have with furniture or a gate.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
- As the least expensive sliding door material, uPVC lets you replace a draughty older patio door with modern double glazing on a modest budget.
- Shoot-bolt or hook locking on the sliding panel, plus anti-lift devices, help stop the panel being lifted or levered out of the frame from outside.
Planning glass for the light in Deeside
In Deeside the shortest day has roughly 7 h 31 min of daylight and the longest about 16 h 58 min. The noon sun sits near 13° above the horizon in winter and 60° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Typical costs for uPVC sliding patio doors around Deeside
Pricing is transparent and does not change because you are in Deeside. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £1,995–£2,495 |
| 3.0 m | 2 panels | £2,495–£3,095 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
What happens when you order uPVC sliding patio doors in Deeside?
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this.
Do you need approval in Deeside?
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Which options matter for uPVC sliding patio doors?
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
- Glass. Toughened double glazing as standard, with laminated, obscure or solar-control units available.
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
Questions about uPVC sliding patio doors in Deeside
Can you match other doors and windows in my Deeside home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What sizes do uPVC sliding doors come in?
uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.
How much do uPVC sliding patio doors cost?
uPVC sliding patio doors start from a guide price of £1,695 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £2,195–£2,695, and a 3.6 m three-panel door is around £2,895. Coloured foils, glass upgrades and a low threshold move the figure up, and the final price is fixed in a written quote after survey.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.