- Postcode district
- TR1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Falmouth, Redruth, Newquay
- Building rules
- England
Is a uPVC sliding patio door a good fit for your home in Truro?
Here is what to weigh up if you are considering uPVC sliding patio doors for a home in Truro:
If the windows on your Truro home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.
Planning a door wider than about 3.6 m for your Truro home? That is beyond the uPVC range, so aluminium or a multi-track system would be the next step.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
- As the least expensive sliding door material, uPVC lets you replace a draughty older patio door with modern double glazing on a modest budget.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
Light and sun in Truro
Sun angles matter for big glazed doors. Around Truro, midday sun reaches about 63° in summer and drops to about 16° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for uPVC sliding patio doors in Truro?
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 1.8 m | 2 panels | £1,895–£2,295 |
| 2.1 m | 2 panels | £1,995–£2,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
Survey, manufacture and fitting around Truro
Here is the usual sequence in Truro: guide price, free survey, written quote, then manufacture (typically 2–4 weeks from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Falmouth, Redruth and Newquay.
Do you need approval in Truro?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for uPVC sliding patio doors in Truro
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
Questions about uPVC sliding patio doors in Truro
How soon can you survey in Truro?
Surveys in the TR1 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks from survey sign-off.
Do I need permission to replace a patio door with a uPVC slider?
In England, replacing a patio door on a house is usually permitted development if the new door looks similar, though flats, listed buildings and Article 4 areas may need consent. The work must be done by a competent person scheme installer or notified to Building Control, and the glass must be safety glazing. Wales, Scotland and Northern Ireland have their own planning and building rules.
What sizes do uPVC sliding doors come in?
uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.