- Postcode district
- EN1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Southgate, Chingford, Tottenham
- Building rules
- England
Why choose uPVC sliding patio doors in Enfield?
These are the points a surveyor will go through with you when you choose uPVC sliding patio doors for a home in Enfield:
The rules for a replacement door in Enfield are checked at survey, and your written quote says which approval route applies to your home.
If the windows on your Enfield home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
- Steel reinforcement inside the main profiles keeps the frame rigid, holds the locking hardware firmly and stops the sliding panel flexing over the years.
- Shoot-bolt or hook locking on the sliding panel, plus anti-lift devices, help stop the panel being lifted or levered out of the frame from outside.
Planning glass for the light in Enfield
Daylight in Enfield runs from about 7 h 48 min in December to 16 h 40 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
uPVC sliding patio doors prices in Enfield
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £1,895–£2,295 |
| 2.1 m | 2 panels | £1,995–£2,495 |
| 3.0 m | 2 panels | £2,495–£3,095 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
Survey, manufacture and fitting around Enfield
Surveys in the EN1 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening.
Rules for uPVC sliding patio doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for uPVC sliding patio doors in Enfield
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
- Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
Questions about uPVC sliding patio doors in Enfield
Do I need building approval for uPVC sliding patio doors in Enfield?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.
How much do uPVC sliding patio doors cost?
uPVC sliding patio doors start from a guide price of £1,695 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £2,195–£2,695, and a 3.6 m three-panel door is around £2,895. Coloured foils, glass upgrades and a low threshold move the figure up, and the final price is fixed in a written quote after survey.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.