- Postcode district
- W6
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Notting Hill, Kensington, Chiswick
- Building rules
- England
uPVC sliding patio doors in Hammersmith: what to know
Here is what to weigh up if you are considering uPVC sliding patio doors for a home in Hammersmith:
Where a patio door in Hammersmith opens onto a conservatory or narrow side return, a sliding panel avoids the clash a hinged door can have with furniture or a gate.
The rules for a replacement door in Hammersmith are checked at survey, and your written quote says which approval route applies to your home.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
- Steel reinforcement inside the main profiles keeps the frame rigid, holds the locking hardware firmly and stops the sliding panel flexing over the years.
Daylight in Hammersmith and what it means for your glass
At the latitude of Hammersmith, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 50 min against 16 h 38 min in midsummer. A south-facing uPVC sliding patio door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for uPVC sliding patio doors in Hammersmith
Pricing is transparent and does not change because you are in Hammersmith. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 2.1 m | 2 panels | £1,995–£2,495 |
| 2.4 m | 2 panels | £2,195–£2,695 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
What happens when you order uPVC sliding patio doors in Hammersmith?
Surveys in the W6 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening.
Rules for uPVC sliding patio doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for uPVC sliding patio doors?
- Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
Questions about uPVC sliding patio doors in Hammersmith
Do you fit uPVC sliding patio doors in Hammersmith?
Yes. We survey and fit uPVC sliding patio doors in Hammersmith and across Greater London, including nearby Notting Hill and Kensington. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Do I need permission to replace a patio door with a uPVC slider?
In England, replacing a patio door on a house is usually permitted development if the new door looks similar, though flats, listed buildings and Article 4 areas may need consent. The work must be done by a competent person scheme installer or notified to Building Control, and the glass must be safety glazing. Wales, Scotland and Northern Ireland have their own planning and building rules.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.
Are uPVC sliding doors secure?
uPVC sliding doors are secure when the sliding panel has multi-point locking, anti-lift protection and steel reinforcement in the frame. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets. Laminated glass adds resistance to breaking through, and a key-locking handle stops the door being opened from inside if a pane is broken.