- Postcode district
- SE13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Blackheath, Catford, Greenwich
- Building rules
- England
Why choose uPVC sliding patio doors in Lewisham?
These are the points a surveyor will go through with you when you choose uPVC sliding patio doors for a home in Lewisham:
If the windows on your Lewisham home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.
The rules for a replacement door in Lewisham are checked at survey, and your written quote says which approval route applies to your home.
- Shoot-bolt or hook locking on the sliding panel, plus anti-lift devices, help stop the panel being lifted or levered out of the frame from outside.
- As the least expensive sliding door material, uPVC lets you replace a draughty older patio door with modern double glazing on a modest budget.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
Sunlight, glass and orientation in Lewisham
The midday sun over Lewisham ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
What should you budget for uPVC sliding patio doors in Lewisham?
Guide prices are the same across Greater London: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £2,195–£2,695 |
| 3.0 m | 2 panels | £2,495–£3,095 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
How fitting works in Lewisham
We plan the job around your home in Lewisham: survey first, then a written quote, then manufacture (typically 2–4 weeks from survey sign-off). The fitting itself usually takes 1 day for a straight swap in an existing opening. If you are in Blackheath or Catford, the same process and prices apply.
Rules for uPVC sliding patio doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
Questions about uPVC sliding patio doors in Lewisham
Is the price different in Lewisham?
No. Guide prices for uPVC sliding patio doors are the same across mainland Britain, including Lewisham. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
What sizes do uPVC sliding doors come in?
uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.
Should I choose uPVC or aluminium for a sliding door?
Choose uPVC if budget and a quick, simple replacement matter most, and aluminium if you want slimmer frames, bigger panels or a powder-coated colour. uPVC insulates well and costs less, but its frames are wider and its panels smaller. Aluminium suits openings over about 3.6 m and modern extensions. Our aluminium vs uPVC guide sets out the differences.