- Postcode district
- TW11
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Twickenham, Kingston upon Thames, Surbiton
- Building rules
- England
Why choose uPVC sliding patio doors in Teddington?
A few practical points decide whether uPVC sliding patio doors suit a particular room and opening:
Replacing a tired patio door in Teddington? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
If the windows on your Teddington home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
- Multi-chambered uPVC profiles trap still air inside the frame, so the frame itself insulates well without needing a separate thermal break.
- As the least expensive sliding door material, uPVC lets you replace a draughty older patio door with modern double glazing on a modest budget.
How much sun will a door in Teddington get?
Daylight in Teddington runs from about 7 h 50 min in December to 16 h 37 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
What should you budget for uPVC sliding patio doors in Teddington?
Guide prices are the same across Greater London: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 2.1 m | 2 panels | £1,995–£2,495 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
Survey, manufacture and fitting around Teddington
Here is the usual sequence in Teddington: guide price, free survey, written quote, then manufacture (typically 2–4 weeks from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Twickenham, Kingston upon Thames and Surbiton.
Do you need approval in Teddington?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Specification choices for uPVC sliding patio doors in Teddington
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
Questions about uPVC sliding patio doors in Teddington
Can you match other doors and windows in my Teddington home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Should I choose uPVC or aluminium for a sliding door?
Choose uPVC if budget and a quick, simple replacement matter most, and aluminium if you want slimmer frames, bigger panels or a powder-coated colour. uPVC insulates well and costs less, but its frames are wider and its panels smaller. Aluminium suits openings over about 3.6 m and modern extensions. Our aluminium vs uPVC guide sets out the differences.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.
What sizes do uPVC sliding doors come in?
uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.