Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
UPVC sliding patio doors
uPVC sliding patio doors · WD7

uPVC sliding patio doors in Radlett

Planning uPVC sliding patio doors for a home in Radlett? We measure, make and fit to your opening across Hertfordshire, with Building Regulations compliance arranged and the certificate sent to you.

Postcode district
WD7
Survey
Free for new and replacement doors
Typical lead time
Typically 2–4 weeks from survey sign-off
Guide price
From £1,695 inc VAT
Nearby
St Albans, Edgware, Barnet
Building rules
England

What uPVC sliding patio doors offer homes in Radlett

Before you settle on a door type, it helps to know what uPVC sliding patio doors do well and what to check before you order.

For a rental or family home in Radlett, frames that never need painting keep upkeep down to an occasional wipe, which is one reason uPVC sliding patio doors suit tighter budgets.

If the windows on your Radlett home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.

  • Multi-chambered uPVC profiles trap still air inside the frame, so the frame itself insulates well without needing a separate thermal break.
  • uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
  • Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.

Planning glass for the light in Radlett

June 62°Dec 15°

At the latitude of Radlett, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 48 min against 16 h 40 min in midsummer. A south-facing uPVC sliding patio door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.

What should you budget for uPVC sliding patio doors in Radlett?

These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.

What should you budget for uPVC sliding patio doors in Radlett?
Overall widthTypical panelsGuide price (fitted, inc VAT)
1.5 m2 panels£1,695–£2,095
2.4 m2 panels£2,195–£2,695
3.6 m3 panels£2,895–£3,495

See every size on the uPVC sliding patio doors page or try the guide price tool.

How fitting works in Radlett

We plan the job around your home in Radlett: survey first, then a written quote, then manufacture (typically 2–4 weeks from survey sign-off). The fitting itself usually takes 1 day for a straight swap in an existing opening. If you are in St Albans or Edgware, the same process and prices apply.

Rules for uPVC sliding patio doors in England

In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.

Which options matter for uPVC sliding patio doors?

  • Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
  • Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
  • Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.

Questions about uPVC sliding patio doors in Radlett

Do I need building approval for uPVC sliding patio doors in Radlett?

In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.

How quickly can a uPVC patio door be fitted?

A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.

Do I need permission to replace a patio door with a uPVC slider?

In England, replacing a patio door on a house is usually permitted development if the new door looks similar, though flats, listed buildings and Article 4 areas may need consent. The work must be done by a competent person scheme installer or notified to Building Control, and the glass must be safety glazing. Wales, Scotland and Northern Ireland have their own planning and building rules.

What sizes do uPVC sliding doors come in?

uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote