Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
UPVC sliding patio doors
uPVC sliding patio doors · DN35

uPVC sliding patio doors in Cleethorpes

Our uPVC sliding patio doors are made to measure for each opening and fitted in Cleethorpes and nearby Grimsby. The written quote fixes the price for the surveyed specification.

Postcode district
DN35
Survey
Free for new and replacement doors
Typical lead time
Typically 2–4 weeks from survey sign-off
Guide price
From £1,695 inc VAT
Nearby
Grimsby, Louth, Hull
Building rules
England

uPVC sliding patio doors in Cleethorpes: what to know

A few practical points decide whether uPVC sliding patio doors suit a particular room and opening:

If the windows on your Cleethorpes home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.

The rules for a replacement door in Cleethorpes are checked at survey, and your written quote says which approval route applies to your home.

  • uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
  • A two-panel uPVC slider usually fits the same opening as an old patio door, so a straight swap avoids building work and typically takes a day.
  • Steel reinforcement inside the main profiles keeps the frame rigid, holds the locking hardware firmly and stops the sliding panel flexing over the years.

Daylight in Cleethorpes and what it means for your glass

June 60°Dec 13°

Sun angles matter for big glazed doors. Around Cleethorpes, midday sun reaches about 60° in summer and drops to about 13° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.

What should you budget for uPVC sliding patio doors in Cleethorpes?

These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.

What should you budget for uPVC sliding patio doors in Cleethorpes?
Overall widthTypical panelsGuide price (fitted, inc VAT)
1.5 m2 panels£1,695–£2,095
2.4 m2 panels£2,195–£2,695
3.6 m3 panels£2,895–£3,495

See every size on the uPVC sliding patio doors page or try the guide price tool.

From survey to fitted door in Cleethorpes

Here is the usual sequence in Cleethorpes: guide price, free survey, written quote, then manufacture (typically 2–4 weeks from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Grimsby, Louth and Hull.

Do you need approval in Cleethorpes?

In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.

Choosing the specification

  • Foiled colours. Anthracite grey, black, cream or woodgrain foils on one or both faces, for an extra charge.
  • Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
  • Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.

Questions about uPVC sliding patio doors in Cleethorpes

Do I need building approval for uPVC sliding patio doors in Cleethorpes?

In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.

What sizes do uPVC sliding doors come in?

uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.

Should I choose uPVC or aluminium for a sliding door?

Choose uPVC if budget and a quick, simple replacement matter most, and aluminium if you want slimmer frames, bigger panels or a powder-coated colour. uPVC insulates well and costs less, but its frames are wider and its panels smaller. Aluminium suits openings over about 3.6 m and modern extensions. Our aluminium vs uPVC guide sets out the differences.

Do I need permission to replace a patio door with a uPVC slider?

In England, replacing a patio door on a house is usually permitted development if the new door looks similar, though flats, listed buildings and Article 4 areas may need consent. The work must be done by a competent person scheme installer or notified to Building Control, and the glass must be safety glazing. Wales, Scotland and Northern Ireland have their own planning and building rules.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote