- Postcode district
- LN5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Gainsborough, Newark-on-Trent, Sleaford
- Building rules
- England
Are uPVC sliding patio doors right for your Lincoln home?
These are the points a surveyor will go through with you when you choose uPVC sliding patio doors for a home in Lincoln:
Where a patio door in Lincoln opens onto a conservatory or narrow side return, a sliding panel avoids the clash a hinged door can have with furniture or a gate.
If the windows on your Lincoln home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.
- As the least expensive sliding door material, uPVC lets you replace a draughty older patio door with modern double glazing on a modest budget.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
- A two-panel uPVC slider usually fits the same opening as an old patio door, so a straight swap avoids building work and typically takes a day.
Planning glass for the light in Lincoln
Sun angles matter for big glazed doors. Around Lincoln, midday sun reaches about 60° in summer and drops to about 13° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for uPVC sliding patio doors in Lincoln?
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 1.8 m | 2 panels | £1,895–£2,295 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
How fitting works in Lincoln
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this.
Rules for uPVC sliding patio doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your uPVC sliding patio door
- Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
- Foiled colours. Anthracite grey, black, cream or woodgrain foils on one or both faces, for an extra charge.
Questions about uPVC sliding patio doors in Lincoln
Do you fit uPVC sliding patio doors in Lincoln?
Yes. We survey and fit uPVC sliding patio doors in Lincoln and across Lincolnshire, including nearby Gainsborough and Newark-on-Trent. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
What sizes do uPVC sliding doors come in?
uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.
Are uPVC sliding doors energy efficient?
uPVC sliding doors are energy efficient because the plastic frame conducts little heat, with whole-door U-values typically around 1.3–1.6 W/m²K double glazed, depending on profile and glass. In England, a replacement door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, so the sealed unit is specified to meet it. Wales, Scotland and Northern Ireland set their own energy requirements.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.