- Postcode district
- BS20
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Nailsea, Clevedon, Westbury-on-Trym
- Building rules
- England
Are uPVC sliding patio doors right for your Portishead home?
Before you settle on a door type, it helps to know what uPVC sliding patio doors do well and what to check before you order.
If the windows on your Portishead home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.
Replacing a tired patio door in Portishead? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
- A two-panel uPVC slider usually fits the same opening as an old patio door, so a straight swap avoids building work and typically takes a day.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
- Multi-chambered uPVC profiles trap still air inside the frame, so the frame itself insulates well without needing a separate thermal break.
Daylight in Portishead and what it means for your glass
Because Portishead sees long summer days (about 16 h 38 min) and short winter ones (about 7 h 50 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do uPVC sliding patio doors cost in Portishead?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Portishead home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £1,995–£2,495 |
| 2.4 m | 2 panels | £2,195–£2,695 |
| 3.0 m | 2 panels | £2,495–£3,095 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
How fitting works in Portishead
Surveys in the BS20 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening.
Rules for uPVC sliding patio doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
- Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.
- Glass. Toughened double glazing as standard, with laminated, obscure or solar-control units available.
Questions about uPVC sliding patio doors in Portishead
Can you match other doors and windows in my Portishead home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Are uPVC sliding doors energy efficient?
uPVC sliding doors are energy efficient because the plastic frame conducts little heat, with whole-door U-values typically around 1.3–1.6 W/m²K double glazed, depending on profile and glass. In England, a replacement door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, so the sealed unit is specified to meet it. Wales, Scotland and Northern Ireland set their own energy requirements.
Should I choose uPVC or aluminium for a sliding door?
Choose uPVC if budget and a quick, simple replacement matter most, and aluminium if you want slimmer frames, bigger panels or a powder-coated colour. uPVC insulates well and costs less, but its frames are wider and its panels smaller. Aluminium suits openings over about 3.6 m and modern extensions. Our aluminium vs uPVC guide sets out the differences.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.