- Postcode district
- WS7
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Lichfield, Cannock, Aldridge
- Building rules
- England
Why choose uPVC sliding patio doors in Burntwood?
Before you settle on a door type, it helps to know what uPVC sliding patio doors do well and what to check before you order.
The rules for a replacement door in Burntwood are checked at survey, and your written quote says which approval route applies to your home.
Replacing a tired patio door in Burntwood? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
- Multi-chambered uPVC profiles trap still air inside the frame, so the frame itself insulates well without needing a separate thermal break.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
- Shoot-bolt or hook locking on the sliding panel, plus anti-lift devices, help stop the panel being lifted or levered out of the frame from outside.
Daylight in Burntwood and what it means for your glass
Sun angles matter for big glazed doors. Around Burntwood, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for uPVC sliding patio doors in Burntwood?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Burntwood home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 2.1 m | 2 panels | £1,995–£2,495 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
Survey, manufacture and fitting around Burntwood
Surveys in the WS7 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening.
Do you need approval in Burntwood?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for uPVC sliding patio doors?
- Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
Questions about uPVC sliding patio doors in Burntwood
Do you fit uPVC sliding patio doors in Burntwood?
Yes. We survey and fit uPVC sliding patio doors in Burntwood and across Staffordshire, including nearby Lichfield and Cannock. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
What sizes do uPVC sliding doors come in?
uPVC sliding doors are made to measure, so they come in any size within the system limits rather than set sizes. Our uPVC range covers overall widths from about 1.5 m to 3.6 m at standard 2.1 m height. Two panels cover most openings up to about 3 m, and beyond that a third panel is added. For larger openings, aluminium carries bigger panels.
Are uPVC sliding doors energy efficient?
uPVC sliding doors are energy efficient because the plastic frame conducts little heat, with whole-door U-values typically around 1.3–1.6 W/m²K double glazed, depending on profile and glass. In England, a replacement door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, so the sealed unit is specified to meet it. Wales, Scotland and Northern Ireland set their own energy requirements.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.