- Postcode district
- RH1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Reigate, Horley, Coulsdon
- Building rules
- England
Why choose uPVC sliding patio doors in Redhill?
These are the points a surveyor will go through with you when you choose uPVC sliding patio doors for a home in Redhill:
The rules for a replacement door in Redhill are checked at survey, and your written quote says which approval route applies to your home.
Replacing a tired patio door in Redhill? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
- Shoot-bolt or hook locking on the sliding panel, plus anti-lift devices, help stop the panel being lifted or levered out of the frame from outside.
- A two-panel uPVC slider usually fits the same opening as an old patio door, so a straight swap avoids building work and typically takes a day.
Daylight in Redhill and what it means for your glass
In Redhill the shortest day has roughly 7 h 52 min of daylight and the longest about 16 h 35 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
What should you budget for uPVC sliding patio doors in Redhill?
Guide prices are the same across Surrey: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £1,895–£2,295 |
| 2.4 m | 2 panels | £2,195–£2,695 |
| 3.0 m | 2 panels | £2,495–£3,095 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
Survey, manufacture and fitting around Redhill
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this.
Do you need approval in Redhill?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Options to consider for your uPVC sliding patio door
- Glass. Toughened double glazing as standard, with laminated, obscure or solar-control units available.
- Foiled colours. Anthracite grey, black, cream or woodgrain foils on one or both faces, for an extra charge.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
Questions about uPVC sliding patio doors in Redhill
How soon can you survey in Redhill?
Surveys in the RH1 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks from survey sign-off.
Are uPVC sliding doors secure?
uPVC sliding doors are secure when the sliding panel has multi-point locking, anti-lift protection and steel reinforcement in the frame. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets. Laminated glass adds resistance to breaking through, and a key-locking handle stops the door being opened from inside if a pane is broken.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.
Are uPVC sliding doors energy efficient?
uPVC sliding doors are energy efficient because the plastic frame conducts little heat, with whole-door U-values typically around 1.3–1.6 W/m²K double glazed, depending on profile and glass. In England, a replacement door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, so the sealed unit is specified to meet it. Wales, Scotland and Northern Ireland set their own energy requirements.