- Postcode district
- CV12
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Nuneaton, Coventry, Hinckley
- Building rules
- England
Is a uPVC sliding patio door a good fit for your home in Bedworth?
A few practical points decide whether uPVC sliding patio doors suit a particular room and opening:
Replacing a tired patio door in Bedworth? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
Planning a door wider than about 3.6 m for your Bedworth home? That is beyond the uPVC range, so aluminium or a multi-track system would be the next step.
- As the least expensive sliding door material, uPVC lets you replace a draughty older patio door with modern double glazing on a modest budget.
- A two-panel uPVC slider usually fits the same opening as an old patio door, so a straight swap avoids building work and typically takes a day.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
Sunlight, glass and orientation in Bedworth
Sun angles matter for big glazed doors. Around Bedworth, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Typical costs for uPVC sliding patio doors around Bedworth
Guide prices are the same across Warwickshire: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £1,995–£2,495 |
| 2.4 m | 2 panels | £2,195–£2,695 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
What happens when you order uPVC sliding patio doors in Bedworth?
Here is the usual sequence in Bedworth: guide price, free survey, written quote, then manufacture (typically 2–4 weeks from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Nuneaton, Coventry and Hinckley.
Rules for uPVC sliding patio doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for uPVC sliding patio doors?
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
- Glass. Toughened double glazing as standard, with laminated, obscure or solar-control units available.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
Questions about uPVC sliding patio doors in Bedworth
Is the price different in Bedworth?
No. Guide prices for uPVC sliding patio doors are the same across mainland Britain, including Bedworth. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.
Are uPVC sliding doors secure?
uPVC sliding doors are secure when the sliding panel has multi-point locking, anti-lift protection and steel reinforcement in the frame. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets. Laminated glass adds resistance to breaking through, and a key-locking handle stops the door being opened from inside if a pane is broken.