- Postcode district
- B91
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Shirley, Hall Green, Knowle
- Building rules
- England
uPVC sliding patio doors in Solihull: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how uPVC sliding patio doors tend to work out in practice:
Replacing a tired patio door in Solihull? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
Planning a door wider than about 3.6 m for your Solihull home? That is beyond the uPVC range, so aluminium or a multi-track system would be the next step.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
- Woodgrain and colour foils, including anthracite grey and black, let a uPVC door match existing windows instead of appearing as a white frame on a coloured elevation.
- Steel reinforcement inside the main profiles keeps the frame rigid, holds the locking hardware firmly and stops the sliding panel flexing over the years.
Planning glass for the light in Solihull
In Solihull the shortest day has roughly 7 h 40 min of daylight and the longest about 16 h 49 min. The noon sun sits near 14° above the horizon in winter and 61° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
uPVC sliding patio doors prices in Solihull
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 1.8 m | 2 panels | £1,895–£2,295 |
| 2.4 m | 2 panels | £2,195–£2,695 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
Timescales for uPVC sliding patio doors in Solihull
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 2–4 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight swap in an existing opening for a door like this.
Do you need approval in Solihull?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
- Threshold. A standard threshold for a straight swap, or a lower threshold where the floor build-up allows.
Questions about uPVC sliding patio doors in Solihull
Do you fit uPVC sliding patio doors in Solihull?
Yes. We survey and fit uPVC sliding patio doors in Solihull and across the West Midlands, including nearby Shirley and Hall Green. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much do uPVC sliding patio doors cost?
uPVC sliding patio doors start from a guide price of £1,695 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £2,195–£2,695, and a 3.6 m three-panel door is around £2,895. Coloured foils, glass upgrades and a low threshold move the figure up, and the final price is fixed in a written quote after survey.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.
Do I need permission to replace a patio door with a uPVC slider?
In England, replacing a patio door on a house is usually permitted development if the new door looks similar, though flats, listed buildings and Article 4 areas may need consent. The work must be done by a competent person scheme installer or notified to Building Control, and the glass must be safety glazing. Wales, Scotland and Northern Ireland have their own planning and building rules.