- Postcode district
- NW5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Camden, Highgate, Hampstead
- Building rules
- England
What aluminium sliding doors offer homes in Kentish Town
A few practical points decide whether aluminium sliding doors suit a particular room and opening:
Before aluminium sliding doors are ordered for a Kentish Town home, the survey should check the opening width, floor levels and existing lintel, so the quote reflects the real job.
If your Kentish Town home has a rear extension or kitchen-diner, aluminium sliding doors let you place a table close to the glass, because no panel swings into the room.
- Narrow aluminium frames and meeting stiles put more of the opening into glass, so you see more garden and less frame than with a uPVC door of the same size.
- Aluminium is stiff enough to carry wide panels without bowing, which keeps the number of vertical frames low even across openings of four, five or six metres.
- Because the panels slide rather than swing, nothing opens into the room or across the patio, leaving space for a dining table, sofa or planters right up to the glass.
Planning glass for the light in Kentish Town
At the latitude of Kentish Town, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 49 min against 16 h 39 min in midsummer. A south-facing aluminium sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for aluminium sliding doors in Kentish Town
Pricing is transparent and does not change because you are in Kentish Town. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 2.1 m | 2 panels | £3,995–£4,895 |
| 4.8 m | 4 panels | £6,995–£8,495 |
See every size on the aluminium sliding doors page or try the guide price tool.
Timescales for aluminium sliding doors in Kentish Town
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel straight swap; 1–2 days for larger doors for a door like this.
Do you need approval in Kentish Town?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your aluminium sliding door
- Panel configuration. Two, three or four panels, with the sliding panel on the left, right or both sides to suit how you use the room.
- Dual colour. A different colour inside and outside, so the exterior can match your windows while the interior suits the room.
- Colours. Standard shades such as anthracite grey, black and white, or a special RAL colour for an extra charge.
Questions about aluminium sliding doors in Kentish Town
Do I need building approval for aluminium sliding doors in Kentish Town?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.
Are aluminium sliding doors warm enough for a UK home?
Thermally broken aluminium sliding doors are warm enough for most homes, with typical whole-door U-values around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed, depending on the system. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, so the glass is specified to meet that. Wales, Scotland and Northern Ireland have their own rules.
How long do aluminium sliding doors take to arrive?
Aluminium sliding doors typically take 4–6 weeks to make after you sign off the surveyed specification, because each door is built to measure and powder coated to order. Fitting a straight swap of a two-panel door typically takes 1 day, and larger doors 1–2 days. These are typical times rather than promises, and we confirm a date once the order is placed.