- Postcode district
- NW5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Camden, Highgate, Hampstead
- Building rules
- England
Are tilt and slide doors right for your Kentish Town home?
A few practical points decide whether tilt and slide doors suit a particular room and opening:
For a flat in Kentish Town, check your lease or title deeds and speak to the managing agent, factor or other owners before replacing a balcony door, since flats can need consent that houses do not.
Young children at home in Kentish Town? A sliding restrictor, available on many systems, limits how far the sash opens while still letting air in.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
Sunlight, glass and orientation in Kentish Town
Sun angles matter for big glazed doors. Around Kentish Town, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Typical costs for tilt and slide doors around Kentish Town
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Kentish Town home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
See every size on the tilt and slide doors page or try the guide price tool.
What happens when you order tilt and slide doors in Kentish Town?
Surveys in the NW5 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening.
Do you need approval in Kentish Town?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for tilt and slide doors in Kentish Town
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
Questions about tilt and slide doors in Kentish Town
Do I need building approval for tilt and slide doors in Kentish Town?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Is a tilt and slide door safe to leave tilted?
A tilt and slide door in the tilt position opens only a narrow gap at the top, so it is far harder to get through than an open door, but it is not locked. Close and lock the sash whenever the house is empty. When closed, perimeter locking points hold the sash like a window, and systems are available tested to PAS 24.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.
Do I need Building Regulations approval for a tilt and slide door?
A tilt and slide door replacing an existing door in England is a controlled fitting, so it must be fitted by an installer registered with a competent person scheme or notified to Building Control, and the glass must be safety glazing to BS EN 12600. Planning permission is not usually needed on a house when the door looks similar. Flats and listed buildings may need consent, and Wales, Scotland and Northern Ireland have their own rules.