Tilt and slide patio doors across Greater London
Here is what to weigh up if you are considering tilt and slide doors for a home in Greater London:
Young children at home in Greater London? A sliding restrictor, available on many systems, limits how far the sash opens while still letting air in.
If a bedroom in your Greater London home opens onto a balcony or garden, the tilt position on tilt and slide doors lets in fresh air at night without leaving the door open.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
- The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.
- When closed, the sash is drawn back into the frame and presses onto gaskets on all four edges, giving a window-like seal against draughts and driving rain.
Guide prices for tilt and slide doors in Greater London
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
| 3.0 m | 2 panels | £2,995–£3,595 |
Every size is on the tilt and slide doors page.
Daylight and glass in Greater London
In Greater London the shortest day has roughly 7 h 50 min of daylight and the longest about 16 h 38 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Towns we cover in Greater London
We survey and fit tilt and slide doors in 90 towns across Greater London, including the BR1, BR3, BR6, BR7, CR0, CR4 postcode districts.
Approvals in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Questions about tilt and slide doors in Greater London
Is the price different in Greater London?
No. Guide prices for tilt and slide doors are the same across mainland Britain, including Greater London. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.
Do I need Building Regulations approval for a tilt and slide door?
A tilt and slide door replacing an existing door in England is a controlled fitting, so it must be fitted by an installer registered with a competent person scheme or notified to Building Control, and the glass must be safety glazing to BS EN 12600. Planning permission is not usually needed on a house when the door looks similar. Flats and listed buildings may need consent, and Wales, Scotland and Northern Ireland have their own rules.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.