- Postcode district
- RM10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Barking, Romford, Hornchurch
- Building rules
- England
Are tilt and slide doors right for your Dagenham home?
A few practical points decide whether tilt and slide doors suit a particular room and opening:
Is the opening in your Dagenham home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
For a flat in Dagenham, check your lease or title deeds and speak to the managing agent, factor or other owners before replacing a balcony door, since flats can need consent that houses do not.
- A sliding restrictor, available on many systems, limits how far the sash can open, which is useful for upstairs balconies and homes with young children.
- Tilting the sash lets steam and cooking smells out of a kitchen-diner in seconds, without the security worry of a door left wide open.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
Sunlight, glass and orientation in Dagenham
At the latitude of Dagenham, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 49 min against 16 h 39 min in midsummer. A south-facing tilt and slide door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for tilt and slide doors in Dagenham
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
Survey, manufacture and fitting around Dagenham
A surveyor visits your Dagenham home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off — and fitting usually takes 1 day for a straight swap in an existing opening. We also cover Barking (5 km west) and Romford (5 km north-east).
Do you need approval in Dagenham?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your tilt and slide door
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
- Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
Questions about tilt and slide doors in Dagenham
Can you match other doors and windows in my Dagenham home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Are tilt and slide doors draught-proof?
Tilt and slide doors are among the most draught-resistant sliding designs because the closed sash compresses gaskets on all four edges. Thermal performance depends on frame material and glass. In England, a replacement door in an existing home with more than 60% glazing must reach a U-value of 1.4 W/m²K or better, so the glass is specified to meet it. Wales, Scotland and Northern Ireland have their own requirements.
Is a tilt and slide door safe to leave tilted?
A tilt and slide door in the tilt position opens only a narrow gap at the top, so it is far harder to get through than an open door, but it is not locked. Close and lock the sash whenever the house is empty. When closed, perimeter locking points hold the sash like a window, and systems are available tested to PAS 24.
Do I need Building Regulations approval for a tilt and slide door?
A tilt and slide door replacing an existing door in England is a controlled fitting, so it must be fitted by an installer registered with a competent person scheme or notified to Building Control, and the glass must be safety glazing to BS EN 12600. Planning permission is not usually needed on a house when the door looks similar. Flats and listed buildings may need consent, and Wales, Scotland and Northern Ireland have their own rules.