- Postcode district
- CR0
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Purley, Carshalton, Mitcham
- Building rules
- England
What tilt and slide doors offer homes in Croydon
These are the points a surveyor will go through with you when you choose tilt and slide doors for a home in Croydon:
Is the opening in your Croydon home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
Where an old patio door in Croydon rattles or lets in draughts, a sash that seals on all four edges is a practical fix that keeps the same opening.
- The tilt position opens a narrow gap at the top of the sash while the hardware holds it in place, so a room can be aired without leaving a door open.
- The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
How much sun will a door in Croydon get?
At the latitude of Croydon, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 51 min against 16 h 37 min in midsummer. A south-facing tilt and slide door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for tilt and slide doors in Croydon
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Croydon home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
From survey to fitted door in Croydon
A surveyor visits your Croydon home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off — and fitting usually takes 1 day for a straight swap in an existing opening. We also cover Purley (4 km south) and Carshalton (5 km west).
Rules for tilt and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your tilt and slide door
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
- Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
Questions about tilt and slide doors in Croydon
Do you fit tilt and slide doors in Croydon?
Yes. We survey and fit tilt and slide doors in Croydon and across Greater London, including nearby Purley and Carshalton. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Are tilt and slide doors draught-proof?
Tilt and slide doors are among the most draught-resistant sliding designs because the closed sash compresses gaskets on all four edges. Thermal performance depends on frame material and glass. In England, a replacement door in an existing home with more than 60% glazing must reach a U-value of 1.4 W/m²K or better, so the glass is specified to meet it. Wales, Scotland and Northern Ireland have their own requirements.
How do I maintain a tilt and slide door?
Maintaining a tilt and slide door means keeping the bottom track and drainage clear, wiping the gaskets with a damp cloth and lightly oiling the moving hardware points once a year. If the sash starts to catch or the handle feels stiff, the hinges and keeps can be adjusted rather than replaced. Gaskets that have flattened after many years can be renewed on their own, restoring the seal without a new sash.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.