- Postcode district
- SO51
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Totton, Eastleigh, Southampton
- Building rules
- England
Are aluminium sliding doors right for your Romsey home?
These are the points a surveyor will go through with you when you choose aluminium sliding doors for a home in Romsey:
Before aluminium sliding doors are ordered for a Romsey home, the survey should check the opening width, floor levels and existing lintel, so the quote reflects the real job.
If your Romsey home has a rear extension or kitchen-diner, aluminium sliding doors let you place a table close to the glass, because no panel swings into the room.
- Narrow aluminium frames and meeting stiles put more of the opening into glass, so you see more garden and less frame than with a uPVC door of the same size.
- Polyester powder coating is baked onto the aluminium in the factory, giving a hard, even colour that resists fading and chalking and does not need repainting in normal use.
- Panels run on adjustable tandem rollers along a hard-wearing track, so even a heavy double or triple glazed panel can be opened smoothly with one hand.
Sunlight, glass and orientation in Romsey
Sun angles matter for big glazed doors. Around Romsey, midday sun reaches about 62° in summer and drops to about 16° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for aluminium sliding doors in Romsey
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Romsey home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 2.1 m | 2 panels | £3,995–£4,895 |
| 3.0 m | 2 panels | £4,995–£6,095 |
See every size on the aluminium sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Romsey
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel straight swap; 1–2 days for larger doors for a door like this.
Do you need approval in Romsey?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for aluminium sliding doors?
- Handles and locks. Slim pull handles or lever handles in matching or contrasting finishes, with an enhanced security locking pack available.
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
- Dual colour. A different colour inside and outside, so the exterior can match your windows while the interior suits the room.
Questions about aluminium sliding doors in Romsey
How soon can you survey in Romsey?
Surveys in the SO51 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks from survey sign-off.
Are aluminium sliding doors warm enough for a UK home?
Thermally broken aluminium sliding doors are warm enough for most homes, with typical whole-door U-values around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed, depending on the system. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, so the glass is specified to meet that. Wales, Scotland and Northern Ireland have their own rules.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.
How do you look after aluminium sliding doors?
Aluminium sliding doors need little care: wash the frames with mild soapy water a few times a year, vacuum grit out of the bottom track and keep the drainage slots clear. A light silicone spray on the locking points once a year keeps them smooth, and rollers can be adjusted if a panel starts to drag. Manufacturer guarantees on frames, hardware and sealed units are passed to you, and our workmanship guarantee is set out in writing in your quote.