- Postcode district
- FY1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Poulton-le-Fylde, Thornton-Cleveleys, Lytham St Annes
- Building rules
- England
What aluminium sliding doors offer homes in Blackpool
These are the points a surveyor will go through with you when you choose aluminium sliding doors for a home in Blackpool:
If your Blackpool home has a rear extension or kitchen-diner, aluminium sliding doors let you place a table close to the glass, because no panel swings into the room.
Before aluminium sliding doors are ordered for a Blackpool home, the survey should check the opening width, floor levels and existing lintel, so the quote reflects the real job.
- Multi-point hook locks grip the frame at several points along the closing edge, while anti-lift blocks stop a shut panel being raised off its track from outside.
- Narrow aluminium frames and meeting stiles put more of the opening into glass, so you see more garden and less frame than with a uPVC door of the same size.
- Polyester powder coating is baked onto the aluminium in the factory, giving a hard, even colour that resists fading and chalking and does not need repainting in normal use.
Daylight in Blackpool and what it means for your glass
At the latitude of Blackpool, the midday sun climbs to about 60° in late June but only about 13° in late December, when daylight lasts around 7 h 24 min against 17 h 06 min in midsummer. A south-facing aluminium sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
What should you budget for aluminium sliding doors in Blackpool?
Pricing is transparent and does not change because you are in Blackpool. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £3,995–£4,895 |
| 3.0 m | 2 panels | £4,995–£6,095 |
| 4.0 m | 3 panels | £6,095–£7,395 |
See every size on the aluminium sliding doors page or try the guide price tool.
How fitting works in Blackpool
Surveys in the FY1 district are booked at a time that suits you. After you approve the quote, manufacture is typically 4–6 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a two-panel straight swap; 1–2 days for larger doors.
Do you need approval in Blackpool?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for aluminium sliding doors?
- Dual colour. A different colour inside and outside, so the exterior can match your windows while the interior suits the room.
- Colours. Standard shades such as anthracite grey, black and white, or a special RAL colour for an extra charge.
- Panel configuration. Two, three or four panels, with the sliding panel on the left, right or both sides to suit how you use the room.
Questions about aluminium sliding doors in Blackpool
Do you fit aluminium sliding doors in Blackpool?
Yes. We survey and fit aluminium sliding doors in Blackpool and across Lancashire, including nearby Poulton-le-Fylde and Thornton-Cleveleys. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How do you look after aluminium sliding doors?
Aluminium sliding doors need little care: wash the frames with mild soapy water a few times a year, vacuum grit out of the bottom track and keep the drainage slots clear. A light silicone spray on the locking points once a year keeps them smooth, and rollers can be adjusted if a panel starts to drag. Manufacturer guarantees on frames, hardware and sealed units are passed to you, and our workmanship guarantee is set out in writing in your quote.
How wide can an aluminium sliding door be?
An aluminium sliding door in our range can span from about 1.5 m to 6 m, split into two to four panels. Each panel is usually up to about 2.5–3 m wide depending on the system and the weight of the glass. Wider openings take more panels, and beyond about 6 m a multi-track or lift and slide system is usually the more practical choice.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.